ProScale Paints

ProScale Paints Special Edition Prismacoat Paint & Sealer (30ml)

ProScale Paints Special Edition Prismacoat Paint & Sealer (30ml)

Regular price £20.00
Regular price Sale price £20.00
Sale Sold out
Tax included.

Special Edition paint just 8 sets available in stock until we restock.

Airbrush ready lacquer paint.

DO NOT SPRAY WET OR HEAVY COATS!

In dim light it appears to look like a highly polished/reflective Silver, but when exposed to bright light the entire spectrum explodes into life.

Application:

  • 1st Step if you've never sprayed this product is to do test samples
  • Prime in Grey or black primer
  • Apply a ProScale Paints Deep Black paint
  • Allow the Basecoat to fully dry 45 minutes and now you are ready to apply the ProScale Paints 2K Clear. 
  • Apply 2 coats of 2K and allow to dry. NOTE: We Recommend you to wait 36 Hours for all of the solvents to evaporate before you can proceed to Step 4. You can now sand and buff if necessary to remove any surface imperfections, you will need to be sure to remove all compounds and wax residues with ProScale Paints Pre paint degreaserl to insure a streak-free surface prior to applying the Prismacoat.
  • Begin applying 4-6 coats of Prismacoat using a dusting effect, approx 10psi with a 0.2-0.4mm airbrush needle 
  • Between Coats use a very soft lint-free cloth and carefully remove all of the excess "dust" from the surface every time, when you complete this step you will notice an improvement in the appearance. When you have finished applying our Prismacoat coating use a very soft clean lint-free cloth, soak the cloth with clean warm water and carefully wash the object to remove all of the excess "dust" from the surface. Once you complete this step you will notice an improvement in the final appearance.
  • Allow the Prismacoat to air dry 30 minutes . Be sure all moisture is removed prior to moving on to the next step.
  • You will now apply our Sealer to the Prismacoat to "seal" and allow to dry for 60 minutes, apply 2-3 very light coats and clean out the airbrush with our pre paint degreaser
  • Apply the 2K Clear (using no thinner) until you have a glass like finish and allow to dry, 

Requires ProScale Paints 2k Clearcoat for full effect

Net volume: 1 fl.oz/30ml x 2


View full details